GHD
70 ohm ceramic heating element for GHD Thin Mini MS 5.0 hair straightener
MPN SIRHEATMS5-1
Low stock: 1 left
Available for express shipping within 24h
No countries found
Questions about compatibility?
Questions about compatibility?
Let us help you make sure you're purchasing the right part. You can contact us in several ways and we reply quickly:
- On WhatsApp at +39 351 477 3077
- In chat, by clicking the icon at the bottom right
- By phone at 091-6828368 091-6828368
- By email at info@pmnservice.com
Shipping and returns
Shipping and returns
The order will be processed within 1 working day of the purchase.
- Shipping
Orders paid by 10:00 am on a working day are shipped the same day; all other orders ship on the next working day.
Express shipping in Italy: €5.99 (2-4 working days), free for orders of €30.00 or more.
Delivery times depend on the product: 2-4 working days for items in stock, about 15-25 working days for made-to-order items or items from foreign suppliers, as shown on the product page.
For shipments abroad, the costs and delivery times shown at checkout apply. We only ship to the countries that can be selected at checkout.
Delivery times are indicative and may vary due to temporary courier disruptions or geopolitical events.
PG Service cannot be held responsible for delays caused by strikes, adverse weather, customs delays or socio-political events beyond its control.
Customs fees, duties, import taxes, clearance charges in the destination country and similar costs are always paid by the recipient.
- Returns
Items can be returned within 14 days of receipt. You can start a return from the orders section of your account (click here).
Return shipping costs depend on the reason: they are paid by the customer for a change of mind, and by PG Service in case of our error or a defective product.
Refunds are processed within 48 hours of receiving and checking the return, using the original payment method. The credit then takes about 5-7 working days to appear, depending on your bank.
The refund covers the full amount paid by the buyer, excluding shipping costs.
No refund will be issued for products received damaged, worn or missing internal or external parts or packaging, where applicable. We will provide proof of the product's condition on receipt by contacting you directly.
We always recommend using a tracked shipping method for returns: under no circumstances will we be held responsible if the product is lost.
Return address: PG Service – Via Valplatani 2, 90144 Palermo (PA) – Italy.
Important product information
Important product information
Read these notes on compatibility, measurements, packaging, photos and technical data before purchase.
Customs data, HS Code and country of origin
The data relating to HS Code, customs code and country of origin, when present, is indicative and does not constitute customs advice. It is reported based on the information available when the product page was created, provided by the manufacturer or found on the product/packaging. This data may change. For specific customs requirements or absolute certainty, we recommend contacting us before purchase.
Product packaging
As we sell spare parts and accessories for household appliances, many items are supplied loose by manufacturers, without printed or dedicated packaging. When original or specific packaging is present, it is normally visible in the item photos. Otherwise, the product may be supplied in neutral packaging or without retail packaging, always with suitable protection for transport.
Item dimensions and measurements
The measurements shown on the product page are taken when the item is created and may have a small indicative tolerance of about 1-3 mm. Compatibility should mainly be checked through the brand and model indicated in the description. If the spare part is purchased for models not included in the compatibility list, we cannot guarantee correct fitting based on measurements alone.
Photos, details and technical specifications
The photos and technical specifications are created or reported with care when the product page is created. The manufacturer may change small aesthetic, construction or technical details over time without notice. Any variations do not affect compatibility when the item is purchased for the models indicated in the description. For use on models not listed as compatible, we recommend contacting us before purchase.
General note
The information on the product page is intended to help the customer choose the correct spare part and does not limit the rights provided by current legislation on the legal guarantee of conformity.
Technical specifications
- GHD compatible spare part
- MPN (Manufacturer Part Number): SIRHEATMS5-1
- Country of manufacture: Made in the United Kingdom
- Material: ceramic
- Colour: white
- Compatible series (check the models under compatibility): Thin Mini MS 5.0
- Thermal paste: Recommended
- Type of resistance: Ceramic heating element
- Integrated sensor: No - without integrated thermistor
- Connection type: Cables with terminals
Dimensions manually verified by PG Service
- Round 4.2mm spade terminals
- Cable length 4.5cm / 45mm
- Straightener length 70mm
- Straightener width 7mm
- Thickness 1.2mm
Spare part explanations
The resistance in a hair straightener heats the metal or ceramic plate that comes into indirect contact with the hair. The heating element is powered and regulated by the device's electronics, while sensors and safety systems monitor the temperature. A heater with a value of 70 Ω should only be used when this value, along with the dimensions and connections, matches that intended for the model: a different electrical resistance can alter the thermal power generated.
Symptoms, problems you can solve by replacing the resistance
Does one of the two plates remain cold while the other heats up normally? A broken heating element or a disconnected terminal are among the most likely causes when the fault affects only one plate.
Does one plate take much longer than the other to heat up or remain less hot? Insufficient heat distribution may be due to the element, the thermal interface, or the system that measures and regulates the temperature.
Is the heating intermittent, and does the plate switch from hot to cold during use? Expansion caused by thermal cycles can make a pre-existing loose connection in the cables or ceramic element evident. Also check the PCB and sensor before replacing the component.
Does the straightener display an error, issue warnings, or cut off the heating before reaching the correct temperature? A temperature anomaly does not automatically identify the heater as faulty: the detection system and control board can generate very similar symptoms. An electrical measurement of the component avoids unnecessary replacements.
How to preserve the component's lifespan
The internal heating element does not require periodic cleaning by the user. To preserve the hair straightener, it is best to keep the external surfaces clean when the device is cold and prevent hair products or liquids from penetrating inside. Water, sprays, and cosmetic products must not reach the heating resistance, terminals, or temperature sensor. A damaged resistance must not be glued or repaired with improvised materials.
Installation instructions
- The procedure requires opening the straightener and accessing electrical components, so it is recommended for a technician. Unplug the device and wait for it to cool completely before disassembly.
- Before removing the old heater, photograph the connections and electrically test the original component.
- Carefully remove the old resistance, avoiding bending the metal support or damaging the thermistor. Clean up any residue from the previous thermal interface without scratching the surfaces.
- For the new element, the use of thermal paste is Recommended. Apply it evenly according to the intended procedure and position the heater without creating gaps or pressure points.
- Connect the terminals, respecting the original cable routing and preventing them from being crushed during reassembly.
- After complete closure, perform an electrical and thermal test, checking that both plates heat up regularly and that the regulation operates correctly.
Tips from the PG Service professionals
- Before replacing a ceramic resistance, check continuity and electrical resistance before concluding that the heater is actually faulty. For this component, the nominal value is 70 Ω: do not choose a resistance simply because it has similar dimensions. During installation, do not bend or twist the ceramic, as small microfractures can turn into breaks during subsequent thermal cycles. The use of thermal paste is Recommended to promote uniform contact with the heating support. The most common causes of failure are broken connections, ceramic fractures, thermal stress, and overheating caused by control circuit anomalies. To prolong the life of the heating element, always heat up the straightener with the terminals open and never with the block inserted, as the plates could overheat quickly, damaging the internal components.
Do you need anything else?
In addition to the electrical resistance spare part, we have many original GHD accessories and spare parts available in our catalogue. If you cannot find what you need through the search, you can contact us anytime, and we will respond within a few hours, even on holidays and weekends. And if an item is not available, we will do everything possible to find it and order it exclusively for you. You can find much more with us besides spare parts for GHD hair straighteners!
Compatibility (is it right for my product?)
This heating element is certified for use on the following GHD hair straightener models. Not sure about the spare part's compatibility? Send us a photo of your appliance's label: we will help you choose the right part.
Thin Mini MS 5.0
-
For all orders over €40.00, shipping will be free.
Valid only for shipments to Italy, France, Germany, Spain, Austria, Portugal, Poland, Czech Republic, Slovakia and Belgium.
-
Not sure about your purchase? Need assistance? Need to return the item?
Contact us, we will find a solution that suits your needs in a very short time!
